PALIZZEL BINDER

Machine suitable to carry out the lifting and the binding of green stalks in the espaliers with low fruti and abscendent vegetation. 

The machine works on a side of the row, lifts the shoots delicately bringing them in vertical position, gathering them with one or two ropes contstantly tensed during the advancement and fastened to the wire of the row with a mechanical stapler by means of a pneumatic or mechanical stapler used manually by the operator transported on a board mounted on the lifting device of the tractor ( crawler tractor or with tyre ).
 
TECHNICAL REQUIREMENTS:
  • lateral assembly to the tractor in median position; 
  • shoot lifting belt with flexible rubber frame for the soft treatment of the vegetation; 
  • at the end of the shoot lifting arm there is a joint preventing the breakage or the damaging in case of hinderance;
  • vine-shoot approaching rolling belt it is articulated to absorb any unevenness of the row; 
  • pneumatic stapler, light, rapidly rechargeable; 
  • mechanical stapler, ultralight, economical; 
  • high capacity compressor; with universal joint to the tension inlet of the tractor;
  • discharge valve for condense water with lubricator and pressure gauge, safety valve; 
  • hydraulic operation derived directly from the installation of the tractor;
  • working level up to 2.6 mt form the soil; 
  • consumes: 3000-5000 staples and about 15-20 kg wire each hectare vegetation with poles. 

Semiautomatic Palizzel model binder

brento2.jpg (17708 byte)

binder with electronic stapler, the worker operates standing on the ground without the aid of boards assembled on the tractor