TRIMMERS ROTOR SERIES

The trimmer uses the scissor cutting system (blade/counter-blade).

The modular construction of the machine allows a customized configuration depending on the pruning method of the vineyards.

Every cutting segment or module consists of five fixed blades and two mobile blades, a hydraulic motor with the driving parts hosted by a safety carter. the steel carter has been designed and tested to guarantee utmost safety to the operator protecting him/her against any projection of vegetation during the trimming. Every cutting segment or module works on 0.70 m height.

The hydraulic operation of the equipment is derived from the hydraulic outlets of the tractor.

 

The chassis of the ROTOR trimmer is the same used for the POTEL trimmers. Also the accessories, the controls and the modes of use are the same.
 

 

Differently from the POTEL trimmers, the ROTOR series trimmers require more accurate maintenance and, despite the low speed rate of the revolutions of the cutting blades, a stricter observance of the safety rules is highly recommended.

 

ROTOR 91 trimmer with shoot conveyor

SOME CONFIGURATIONS:

Modules descriptions cutting h
A rotor1.gif (949 byte) With 2 fixed segments 1,40 m
B rotor2.gif (1044 byte) With 3 segments with mechanical inclination of the lower and upper rotors 2,10
C rotor3.gif (1077 byte) with 3 segments, the upper one with hydraulically operated inclination, the lower one with mechanically operated inclination 2,10 with lifted top
D rotor4.gif (472 byte) Like C + hydraulic conveyor for shoots for Casarsa and GDC training methods. 2,10  with lifted top